[. . . ] BORDER/EDGER ATTACHMENT OEM-290-261 / 290-261-081 for the VersaTiller ™ Installation Instructions and Parts List THANK YOU! CAUTION Thank you for ordering a Border/Edger Attachment. [. . . ] Remove screws and nuts securing the four tine sets to the tine shaft (see your Owner’s Manual for specific tine removal instructions). NOTE: The border edger tine can be installed on either side of the machine. Usually it is on the left-hand side for a left-handed person and on the right hand side for a right-handed person. Experiment to see which position best suits your needs. E B C D D E A Figure 1: Border/Edger tine and wheel can be switched to either side. 5. Slide the border/edger tine (A, Figure 1) on the right-hand or left-hand side of the tine shaft. Align the holes in the tine shoulder with the outer hole in the shaft. Secure the clevis pin with a hair pin clip (E). NOTE: This means the shoulder of the border/edger tine faces inward toward the transmission housing. When edging jobs are complete, remove the edger attachment and reinstall the four tine gangs. [. . . ] BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483 Printed in U. S. A. [. . . ]